Slap on TruVativ's RockGuard and pin it through the rough. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum…
• 6061-T6 aluminum construction • Adapts 110 or 130 bcd 5-bolt chainrings to fit one-piece or three-piece single bolt cranks • Anodized finish • Made in the U.S.A.
Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers
Race Face direct-mount chainring spider for Cinch ranksets.
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Race Face Crank Boots • Fits from Race Face: Turbine Cinch, Turbine, Atlas, Evolve, and Ride Cranks • Fits from SRAM: X1 (Alloy), X9, X7, X5, S1400, S1000, S800 Cranks • Fits from Shimano: XT, SLX, Deore Cranks
- 8 bikes worth of adapters for Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. - 65 piece kit includes 4 each Shimano and SRAM adapter sets, plus extra spacers for…
Power to the people! Add the Pioneer Power meter to your existing Shimano crank. Pioneer's crankset-based power meters are simply some of the best power-monitoring systems on the planet, and the Upgrade Kit gives you the chance to add it to your existing crankset. At the heart of the Pioneer Power…
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Pioneer's Shimano Ultegra 6800 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Ultegra 6800 left crank arm meter truly brings power to the people, and gives every rider power-based (also called watt-based) training performance, allowing you to fine-tune…
- Aluminum Hollowtech-II (HT8) crank-arm to BB-spindle Mounting Bolt - Bolt: only one needed for non-drive side
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or…
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage…
• Square taper interface • Only includes left crank
• Square taper interface • Only includes left crank • 175mm length
• Horizontal square interface • Only includes left crank
• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Cotterless
TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.
Replacement crank bolt and puller cap set for Race Face Cinch cranksets.
Race Face aluminum Torx chainring nut/bolt set for triple chainrings. Includes four nut/bolt sets.
Pioneer's Shimano Dura Ace 9000 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Dura Ace 9000 left crank arm meter allows every rider power-based (also called watt-based) training performance, allowing you to fine-tune your pedaling to find race-winning…
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation…
• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Drilled for 9.5mm cotter pins
• OctaLink interface • Only includes left crank • 175mm length
• Adjustable aluminum chain guard • Fits front chainrings from 38T to 48T • Multiple clamp options fit seat tubes from 25.4 to 34.9mm • Black anodized finish
- Dual ring chainguide with 6061-T6 backplate and removable direct mount bashguard - Replaceable upper sharkfin wearplate prevents chain drop and allows front shifting - Dual-position lower roller provides chain tension and security - Includes both 32-36t and 36-40t direct-mount bashguards -…
- XC or Cyclocross top guide, ideal for 1x drivetrains - ST and CX guides mount to 28.6, 31.8 and 34.9 seat tubes - E-Type guides fit Shimano E-Type and SRAM S3 frame mount standards